If you want your Netgear Nighthawk router to work perfectly, then it is recommended that you keep updating its firmware from time to time. What happened? Tried that but it went in vain? No idea about how to fix the issue at hand? Relax! In this post, we’ve provided you with top-notch tips that’ll help you troubleshoot the firmware update failure issue. So, continue reading.
Contents
Resolved: Nighthawk Router Firmware Update Failed
Basic Troubleshooting Tips
Before getting down to the advanced troubleshooting tips, let’s first try to fix the firmware update failure issue using the basic tips mentioned below:
- Check the Hardware
If your Netgear WiFi router isn’t receiving enough power supply from the wall socket, then you are bound to face technical issues like the one you’re facing right now. Thus, make sure that your home router is getting a fluctuation-free power supply from the wall outlet.
- Reduce the Distance Between Your Devices
Sometimes, too much distance between the Netgear Nighthawk router and modem can stop you from updating the firmware. Thus, reduce the distance between your WiFi devices. Once done, access the Netgear router login page, and try to perform router firmware update.
Still stuck with the same issue? Well, it seems our assistance is still needed. So, keep reading.
- Check Your Internet Connection
Chances are that your internet connection isn’t standing up to the mark due to which you aren’t able to perform firmware update. To troubleshoot the issue, is it advised you get in touch with your Internet Service Provider. Get him to fix the internet issue so that you can focus on fixing the one you’re facing at hand.
Advanced Troubleshooting Tips
- Stay Away from Transmitting Appliances
One of the major reasons why you’re facing the firmware update failure issue is because your Nighthawk router is surrounded by electronic devices and transmitting appliances. Such devices can create interference in the WiFi signals of your router, thereby disabling it from getting updated.
Therefore, place your home router away from cordless phones, washing machines, baby monitors, microwave ovens, refrigerators, or any other transmitting appliance.
Now, access the Netgear Nighthawk setup page and check whether you are able to update your router or not.
- Perform Factory Default Reset
If you still aren’t able to get rid of the firmware update failure issue, then we just have one more option that can help you out. And that is, performing Netgear factory default reset.
Here are the steps to reset your Netgear Nighthawk router:
- Grab a cable and connect your router and the existing modem.
- Launch a web browser on your computer and access routerlogin.net.
- Once logged into your router, go to Settings > Administration > Erase.
- Click on the ‘Restore to factory default settings’ option and let your device reset.
You can also reset your Netgear Nighthawk router by following the steps mentioned below:
- Plug the Nighthawk router into a wall socket.
- Press the Power button on the router and let the LED become green.
- Find the Reset button on your Nighthawk router.
- Once found, carefully press the button using a pointed object (oil pin, toothpick, paper clip, etc).
- Give your device a minute or two to get restored to the default mode.
By following these steps, you’ll be able to reset your Netgear WiFi router. Now, download the Nighthawk router app, and try to update the firmware of your device.
In the Nutshell
And, that’s it! This was all about how to get rid of the Netgear router firmware update issue. Now, you can perform router firmware update without getting stopped by technical issues.
