Laying a new roof is quite costly, and homeowners should take the best care of the roofs to make its last its designated life. As roofs are the single largest investment of the building structures, preventing pre-mature roof replacement should be the goal of homeowners because the average roof replacement cost is as good as laying a new roof. It is difficult to tell how much a new roof costs because roofs are of different types and the situations that call for roof replacement are different, which results in varying costs. However, it is possible to estimate a price range for the type of roof you have in mind without actually seeing the roof, which should help to some extent to decide whether to undertake the project or not.
Here are some factors to consider to arrive at the nearest to the actual cost of roof replacement.
Contents
Size of the roof
The size of the roof impacts the price because the larger is the surface area higher is the price. Since covering more area would require more roofing material and involves more labor for installation, larger roofs would cost more.
Slope/pitch
The roof design is another factor that impacts cost. Flat roofs cost less than sloped/ pitched roofs, and more slanted is the roof higher it will cost for a number of reasons.
Installing slanted roofs is a high-risk job as the crew has to work along the slopes throughout the day, often dangling dangerously, and must use additional safety equipment to follow safe working methods, which increases the cost. It increases the time taken to complete the work on slanted surfaces which pushes up the costs further.
Roof accessibility
Since labor cost is the major component in roof installation, roof accessibility impacts roof cost. If it is much difficult to reach the roof, it entails more labor that increases the cost. This especially happens in locations where the houses are too close to one another, creating a tight fit that leaves little room for reaching the top of the building easily. Moreover, if there are some obstacles around the roof or roofs surrounded by trees are difficult to access as it takes more time and special arrangements and equipment to access the roof, which obviously pushes up the costs. The transportation cost of the equipment is an additional cost, and the process of installation involves more labor and time, which together inflates the cost.
Peaks and valleys
There are roof designs that have more peaks and valleys and skylights and chimneys, which requires a lot of jointing work, necessitates more attention to the work, more materials, labor, and time and therefore costs more. Working at peaks and valleys requires careful execution and special workmanship to create completely leak-proof surfaces with an impeccable finish so that the installation does not leave anything to chance. Such deft workmanship involves skilled workmen who charge much higher and the overall cost increases.
Material quality
The choice of roof material impacts the cost, and you can play around a little with the materials by matching them with the roof design and architecture to keep the cost low.
Asphalt shingles are quite affordable, and so are metal roofs made from galvanized steel sheets whereas tile and slate roofs are quite costly. Know about something new 15-Minutes Fried Chicken Breast with Asparagus.
